Techcon TS7000 Rotary Valve Main Housing

Description

The Techcon TS7000 main housing is the machined body that holds the interchangeable cartridge assembly, coupling, and thumb screw on the TS7000IMP rotary auger valve. It is one of the core dispenser parts techs replace when rebuilding a worn valve rather than swapping the entire unit.

Where This Dispenser Parts Component Fits

The main housing accepts the cartridge assembly in three positions (left, center, or right), so the fluid inlet fitting can be oriented to match the automation cell layout. It mounts to a 1 in (25.4 mm) channel bracket on the Z-axis of an automated dispensing table, and it works across every TS7000IMP feed screw pitch (8P, 8P high output, 16P, and 32P), so one housing services the full cartridge lineup.

Purge TS7000IMP valves with dispensing conditioner between shifts or after every eight hours of continuous dispensing, then run a full teardown clean after about a month of service. Housing wear typically shows up as play at the thumb screw or a cartridge that no longer seats flush, both signs this main housing needs replacement rather than just the cartridge insert.

Dispenser Parts Specifications

Order this housing when a cracked or worn body is the reason a TS7000IMP valve is skipping dots or leaking at the thumb screw, rather than replacing the full valve assembly. Pair it with a fresh cartridge assembly and thumb screw for a complete rebuild. Browse our dispensing valves and mixer nozzles for compatible cartridges, feed screws, and syringe barrels, or see Techcon for the full TS7000IMP platform lineup.

Need Help?

Need help matching this housing to your TS7000IMP feed screw pitch? Call (800) 220-1966 or email [email protected].