LP-50 Static Mixing Nozzle, 1/4 in x 6 in, 21 Element

Description

The LP-50 static mixer is a disposable mixing nozzle that blends two part adhesives and sealants as they leave a dual cartridge. The 1/4 inch bore runs 6 inches long with 21 internal mixing elements, so the resin and hardener arrive at the work fully combined and ready to cure at the rated ratio. No power, no moving parts, just clean mixing every time a bead is pulled.

Where the LP-50 static mixer fits

Fabrication shops, maintenance crews, and assembly lines run this nozzle on 50 mL and similar dual cartridges of epoxy, methacrylate, and urethane adhesives. The 21 element count suits medium and higher viscosity systems that need thorough mixing before they bond. Each nozzle is single use, which keeps cured material out of the next bead and protects bond strength on structural and load bearing joints.

How the LP-50 static mixer holds up

The helical elements sit inside a rigid housing that resists collapse under cartridge pressure from manual and pneumatic guns. Once adhesive begins to set, the nozzle is discarded and replaced, so there is no cleaning step and no risk of a partly cured plug carrying into the next application. Keep a supply on hand to match the number of cartridges in a production run. A fresh nozzle on each cartridge also gives a predictable mix length, so the first inch of bead is as well combined as the last, and a fresh element stack means no flow restriction from earlier cured material.

Specifications

Order nozzles in the quantity your run needs so every cartridge gets a fresh mix. Browse more options under dispensers, mixers, and nozzles. For background on how two part systems combine and cure, see the Adhesive and Sealant Council guide to adhesive technologies.

Need Help?

Need help matching a static mixer to your cartridge and adhesive? Call (800) 220-1966 or email [email protected].