Techcon TS5100D Main Housing, Finished

Description

This finished main housing is the structural body of a Techcon TS5100D dispensing valve, one of the dispensing valve parts that carries every other internal component, from the piston or rotor assembly to the fluid inlet and outlet ports. Supplied fully machined and finished rather than as a raw casting, it is a direct replacement for a housing that has been damaged, worn out of tolerance at a seal or bore, or removed for inspection during a full valve teardown. Because the housing sets the alignment for every moving part inside the valve, a worn or out of spec body is one of the few TS5100D issues that a seal kit or rotor swap alone cannot fix.

Where These Dispensing Valve Parts Get Used

Maintenance teams rebuilding a TS5100D valve after years of production cycling reach for a replacement main housing when inspection turns up bore wear, a cracked mounting boss, or thread damage from repeated fitting changes that a simple reseal will not correct. Facilities that standardize spare parts inventory around their TS5100D fleet keep a finished housing on the shelf so a failed valve can be rebuilt on site rather than sent out for repair, cutting the downtime on a dispensing cell that depends on that valve running.

Fit and Handling for These Dispensing Valve Parts

Transfer internal components from the old housing to the replacement in the sequence called out in the TS5100D service documentation, checking each seal and o-ring for wear as it comes out rather than reusing worn seals against a new bore. Torque the mounting fasteners to the spec in the valve’s service literature once the housing is remounted on the dispenser or robot arm, since an under torqued housing can shift alignment under vibration during production runs. Confirm fluid path alignment before returning the valve to service, particularly on lines running abrasive or filled materials where a slight misalignment accelerates wear on the new bore.

Order this housing when a TS5100D rebuild calls for more than a seal kit, or stock one as a standing spare for a valve running continuous production. Browse Chemical Concepts dispensing valves, mixers, and nozzles for the rest of the TS5100D service parts, or see the complete Techcon dispensing valve lineup.

Need Help?

Need help confirming whether your TS5100D needs a full housing replacement or a simpler seal kit? Call (800) 220-1966 or email [email protected].