Techcon TS16-80 Manual Dispenser Gun, 8 oz Cartridge

Description

The Techcon TS16-80 manual dispenser gun applies sealants, RTVs, silicones, adhesives, potting compounds, and greases straight from an 8 oz disposable cartridge. The lightweight ratchet-rod design needs no compressed air, so crews can load a cartridge and work a joint anywhere a hose or compressor cannot reach.

manual dispenser gun applications

Field service, maintenance, and installation crews reach for this manual dispenser gun when a job calls for hand control over bead size and flow rate rather than the output of a pneumatic system. It accepts standard 8 oz disposable plastic cartridges as well as Techkit and Semkit mix cartridges, so one gun covers single-component sealants and certain two-part mixed systems without a tool change. Typical work includes gasket sealing, panel seam sealant, potting small electrical connections, and general-purpose adhesive application in the shop or in the field. Technicians who move between job sites favor this style of dispenser precisely because it needs no compressor, hose, or power outlet nearby.

manual dispenser gun handling and durability

A steel ratchet rod drives the plunger in controlled increments, which keeps bead width consistent even on vertical or overhead joints. The frame is rated for repeated daily use and carries a one year warranty and CE approval. Keep the plunger and cartridge seat clean between loads so cartridge back pressure does not blow past the seal, and match nozzle selection to the material viscosity for a clean bead. Wipe down the ratchet mechanism periodically to keep it moving smoothly under load, especially in dusty field conditions.

Specifications

For related cartridge dispensing hardware, browse dispensers, mixers, and nozzles. Full Techcon product specifications are available from Techcon.

Need Help?

Need help matching cartridge size, nozzle, or mix-kit compatibility to your job? Call (800) 220-1966 or email [email protected].