Description
Techcon TSD1400-111CPK EPR O-Ring, 7/16 In. ID is a Techcon O-ring for dispensing equipment repair when the service point calls for a 7/16 inch ID x 3/32 inch C.S. EPR seal. The ten-pack format supports maintenance benches that replace small seals during planned valve service and troubleshooting.
Techcon O-ring Benefits
- Exact part number keeps replacement work tied to the intended Techcon spare.
- 7/16 inch ID x 3/32 inch C.S. dimensions help technicians compare the removed seal before assembly.
- EPR material callout helps separate this part from Buna and Viton O-rings in the same service drawer.
- Ten pieces per pack support repeat rebuilds without mixing loose seals from different bins.
- Useful for dispensing stations that keep valve spares close to tips, tubing, and fittings.
Use this seal only where the equipment, removed component, or service list calls for the same material and dimensions. O-rings are not interchangeable by diameter alone. Material, cross section, gland condition, and fluid exposure all affect service behavior, so confirm the replacement before the valve is reassembled.
Common Applications for Techcon O-ring
- Dispensing valve rebuilds and fluid-control maintenance tasks.
- Repair kits for adhesive, sealant, coating, grease, or paste dispensing stations.
- Replacement after routine inspection finds flattening, nicks, or material change.
- Bench stock organized by Techcon part number for quick maintenance response.
Compatible Service Notes
Remove the old seal without scratching the gland. Clean residue from the groove, inspect nearby parts for burrs or cured material, and install the new O-ring without twisting it. After assembly, run a controlled test at normal operating conditions and verify shutoff, deposit size, and leak behavior before releasing the station for production use.
Technical Specifications
| Property | Value |
|---|---|
| SKU | TECTSD1400-111CPK |
| Manufacturer part number | TSD1400-111CPK |
| Part type | O-ring for dispensing equipment service |
| Size | 7/16 in. ID x 3/32 in. C.S. |
| Material | EPR |
| Package | 10 pack |
| Brand | Techcon |
Packaging and Ordering
Order this EPR seal when the service task calls for TSD1400-111CPK. Browse related dispensers, mixers, and nozzles for valves, tips, tubing, fittings, and service parts. Current manufacturer information is available from Techcon.
Need Help?
Need help confirming seal material, size, or service fit before ordering? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.