Description
Permabond TA4611 in the 25ml Cartridge
This is the 25ml dual syringe of Permabond TA4611, a two-part 1:1 toughened structural acrylic that bonds untreated polypropylene, polyethylene (HDPE, LDPE, UHMW) and PTFE with no flame, corona, plasma or primer treatment.
The 25ml is the easiest way to try this product. It dispenses by hand, so no gun is required, and it ships with a static mixer. That makes it the right choice for a first trial, a bench test, or precision work on small parts. TA4611 contains no micro beads, so nothing holds the joint open on close-fitting assemblies. For full product data, shear strength on every tested substrate, and grade selection across the series, see the Permabond TA4611 product page.
Key Product Details
| Property | Value |
|---|---|
| Product | Permabond TA4611 |
| Package Size | 25ml |
| Package Type | Dual syringe, hand dispensed |
| Full Case Quantity | 15 |
| Chemistry | Two-part toughened structural acrylic, methacrylate both parts |
| Mix Ratio | 1:1 |
| Mixed Color | Transparent to pale yellow |
| Mixed Viscosity at 25°C | 21,500 cP |
| Pot Life at 23°C | 4 to 6 minutes |
| Fixture Time at 23°C | 10 to 16 minutes |
| Handling Time at 23°C | 40 to 50 minutes |
| Full Cure at 23°C | 24 to 36 hours |
| Maximum Gap Fill | 0.5 mm (0.02 in). Contains no micro beads |
| Storage Temperature | 5 to 25°C (41 to 77°F) |
| Related Composite Product | Permabond TA4611 |
What You Need to Dispense It
- No gun required. The 25ml is a hand syringe. Squeeze the plunger by hand.
- Static mixer: one MBQ 05-16L ships with the cartridge. Order spares if you are running more than one bead, since adhesive cures inside the mixer and each stop needs a fresh nozzle.
- Order single cartridges or full cases. There is no order minimum.
Common Applications
- First trials and substrate testing before committing to a production size
- Precision work on small parts and close-tolerance assemblies
- Visible and cosmetic joints where a thin bond line matters
- Bench repair on polypropylene, HDPE and UHMW parts
- Metal bonding on mild steel and stainless steel
- Field service work where carrying a dispensing gun is impractical
Related Products
- Permabond TA4611 in the 50ml cartridge for regular assembly work
- Permabond TA4611 in the 400ml cartridge for production volume
- Permabond TA4631 for low-odor work areas and underwater bonding
- MBQ 05-16L static mixers
- Low surface energy plastic bonding guide
Reviews
There are no reviews yet.