Description
The Cox PPM 300 XL is a hand powered applicator for two component cartridges. It carries 375, 450, and 600 mL cartridges and ships configured for a 1:1 mix, with a thrust ratio near 26:1 that drives thick, high viscosity adhesives and sealants without a compressor. A wear compensating drive and sintered steel catch plate keep the rod from slipping under load, so output stays even from the first squeeze to the last.
Where the Cox PPM 300 XL works
Fabrication, repair, and assembly benches use it to dispense two part epoxies, acrylics, and urethanes straight from side by side cartridges. The manual action gives direct feel over flow, which helps on detail beads and short shots where a pneumatic gun can overrun. With no air line to drag around, it moves easily between stations and out to field repairs.
How the Cox PPM 300 XL is built
A rigid steel frame and contoured handle take repeated squeezes through a full shift. Support discs seat the cartridge securely for accurate, even output, and the multi ratio design lets you switch cartridge formats with the matching conversion kit. A smooth dripless action follows the trigger, so material stops cleanly when you release pressure and waste stays low. Operators keep consistent flow on long beads, and the open frame makes cartridge changes quick between different materials.
Specifications
| Type | Manual 2-component cartridge dispenser |
|---|---|
| Cartridge sizes | 375, 450, 600 mL |
| Mix ratio | 1:1 (multi-ratio capable) |
| Thrust ratio | About 26:1 |
| Frame | Steel with support discs |
| Power | Manual, no air required |
Pair the dispenser with the right static mixers and cartridges for your adhesive. Browse our dispensers, mixers, and nozzles for matching nozzles and cartridge formats, or see the Cox range for related ratios and sizes.
Need Help?
Need help spec’ing thrust ratio and cartridge format for your material? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.