Description
The DM2X 400-10-60-01 manual gun is the Sulzer Medmix DM2X 400 – 400ml Manual Cartridge Gun set up for 10:1 400ml MIXPAC C-System and F-System two-part cartridges. A 10:1 cartridge meters ten parts of one component to one part of the other. This part number replaces the older DM 400-10. It also runs 470ml, 490ml, and 500ml 10:1 cartridges, including Corian® Joint Adhesive in 470ml and Ultralok in 500ml. Applicators like it because it is easy on the hands. For full specs, the ratio change steps, and every ratio option, see the Sulzer Medmix DM2X 400 – 400ml Manual Cartridge Gun page.
Part Details
| Property | Value |
|---|---|
| Medmix Part Number | DM2X 400-10-60-01 |
| Article ID | 165809 |
| Chemical Concepts SKU | CON-DM2X400-10-60-01 |
| Mix Ratio | 10:1 |
| Cartridge Sizes | 400ml, 470ml, 490ml, and 500ml 10:1 cartridges |
| Conversion Kit to Change Ratio | CKX 400-01-01 for 1:1 and 2:1 or CKX 400-04-01 for 4:1 |
Mixers for 10:1 Cartridges
The mixer follows the cartridge, not the gun. C-System and F-System 400ml cartridges use different mixer outlets, so match the mixer to the cartridge body.
- Xemex X2-C8-8S low-waste static mixer for C-System cartridges, including 4:1 and 10:1
- Medmix MIXPAC MFHX 08-24T static mixer for 4:1 and 10:1 F-System cartridges
Other 400ml Guns for 10:1 Cartridges
- Sulzer Medmix DP2X 400 – 400ml Pneumatic Cartridge Gun for air-powered dispensing
- Newborn VR400-XSP dual component applicator gun as a manual variable ratio option
Frequently Asked Questions
Which cartridges fit the DM2X 400-10-60-01, including 470ml Corian® Joint Adhesive?
The DM2X 400-10-60-01 runs 10:1 cartridges in 400ml, 470ml, 490ml, and 500ml sizes. That includes Corian® Joint Adhesive in 470ml cartridges and Ultralok in 500ml cartridges. It also runs 400ml MIXPAC C-System and F-System cartridges in 10:1. It does not take 200ml cartridges. Confirm the cartridge is 10:1 before you order.
Does the DM2X 400-10-60-01 replace the DM 400-10?
Yes. The DM2X 400-10-60-01 replaced the older DM 400-10, which was discontinued years ago. Call us with your old part number and we will confirm the match.
What mixer do I need for a 10:1 cartridge?
Use the Xemex X2-C8-8S low-waste static mixer for C-System cartridges or the Medmix MIXPAC MFHX 08-24T static mixer for F-System cartridges. Check the cartridge body before you order, since the two systems do not share a mixer outlet.
Can I change this gun to 1:1, 2:1, or 4:1 later?
Yes. The DM2X 400 uses interchangeable cartridge trays and plunger disks, so a conversion kit changes the ratio. This gun needs CKX 400-01-01 for 1:1 and 2:1 or CKX 400-04-01 for 4:1. See the CKX 400 conversion kits.
Questions on fit for your cartridge, ratio, or conversion kit? Call (800) 220-1966 or email [email protected].
Corian is a registered trademark of its owner. Ultralok is a trademark of its owner. MIXPAC is a trademark of medmix Switzerland AG.








Reviews
There are no reviews yet.