Description
TacBond S5901ZF-CA Air Assisted Canister Adhesive is a non-flammable, air-assisted canister contact adhesive formulated for industrial bonding and laminating applications. This high-performance adhesive utilizes a web spray pattern and compressed air delivery system to provide controlled application, strong bonds, and reliable performance across a wide range of substrates in fabrication, assembly, and production environments.
Key Features
- Non-flammable contact adhesive designed for high-temperature industrial bonding applications
- Air-assisted canister system enables consistent spray control and efficient adhesive distribution
- HAPs-free formulation supports compliance-focused manufacturing environments
- Fast dry time helps improve throughput in production and assembly workflows
- Extended open time allows flexibility for positioning and alignment
- High bond strength with strong heat resistance for demanding applications
- Soft web spray pattern supports even coverage and reduced adhesive waste
- Portable canister system supports both shop and field use with compressed air equipment
Technical Specifications
| Specification | Value |
|---|---|
| Product Type | Air-assisted canister contact adhesive |
| Flammability | Non-flammable |
| Dry Time | 1–2 minutes |
| Open Time | 1 hour |
| Color | Clear, Green |
| Flash Point | >93°C |
| VOC | 509 g/L |
| Coverage Rate | CA190 – 8,825 sq. ft. (unbonded) CA360 – 16,725 sq. ft. (unbonded) |
| Pattern | Web |
| Shelf Life | 1 year (unopened) |
| Storage Temperature | 60–90°F |
| HAPs Content | HAPs Free |
| Recommended Application Distance | 6–10 inches (150–250 mm) |
| Recommended Coat Weight | Minimum 2.5 dry grams/sq. ft. |
| Recommended Coverage | 80–100% |
| Bonding Pressure | 40–60 PLI |
| Full Bond Strength | 24–48 hours |
Compatible Substrates and Materials
- Laminates
- Particle board
- Plywood
- Hardwood
- Leather
- Rubber
- Metal
Application Guidance
Ensure all surfaces are clean, dry, and free of contaminants prior to application. Apply adhesive using an air-assisted spray system at a distance of 6–10 inches, maintaining consistent motion and avoiding over-application or puddling. Target 80–100% coverage with a minimum coat weight of 2.5 dry grams per square foot. For porous materials, apply two coats and allow adhesive to dry fully until tacky with no transfer before bonding. Join surfaces carefully and apply 40–60 PLI pressure using a roller. Bonded assemblies can be trimmed immediately, with full strength achieved within 24–48 hours depending on environmental conditions.
Typical Use Cases
- Laminate bonding in fabrication shops
- Wood panel and composite assembly
- Countertop and fixture manufacturing
- Leather andre rubber bonding applications
- General industrial contact adhesive applications using spray systems
Target Industries and Buyers
- Woodworking and millwork shops
- Cabinet and fixture manufacturers
- OEM assembly operations
- Construction and interior build-out contractors
- Industrial fabrication and production facilities
Performance Advantages
Compared to traditional flammable contact adhesives, TacBond S5901ZF-CA provides a non-flammable formulation combined with air-assisted spray control, offering improved safety and consistent application. Its combination of fast drying, long open time, and strong heat-resistant bonding performance makes it well-suited for demanding industrial laminating and assembly processes.
Ordering Information
| Part Number | Size |
|---|---|
| TB-S5901ZF-CA190 / TB-S5901ZFG-CA190 | 190 lbs. |
| TB-S5901ZF-CA360 / TB-S5901ZFG-CA360 | 360 lbs. |
Common Questions
Q: What makes this adhesive non-flammable?
A: It is formulated with non-flammable propellants and solvents as specified in the product data sheet.
Q: What equipment is required to use this product?
A: It requires an air-assisted spray system with compressed air and compatible spray gun equipment.
Q: How fast does the adhesive dry?
A: Typical dry time is 1–2 minutes under normal conditions.
Q: How long can surfaces remain open before bonding?
A: The adhesive provides an open time of approximately 1 hour.
Q: Can it be used on all plastics?
A: No. It is not recommended for plasticized vinyl, flexible plastics, polyethylene, polypropylene, or polystyrene.
Q: When can bonded parts be machined or trimmed?
A: Assemblies can be trimmed or routed immediately after bonding.
Q: When is full bond strength achieved?
A: Full bond strength develops within 24–48 hours depending on conditions.
Q: What colors are available?
A: The adhesive is available in clear and green.
Reviews
There are no reviews yet.