Description
14 Gauge Bent Needle tips are built for heavier controlled deposits where the operator also needs a sharp access angle. This Techcon TE bent tip uses a 14 gauge stainless steel cannula, 1/2 inch length, 90 degree bend, olive hub, and pack of 50 for production and repair benches.
14 Gauge Bent Needle Access Benefits
- 90 degree bend helps place fluid onto side walls, hidden ledges, and tight fixture areas.
- 14 gauge outlet supports higher-flow dispensing than smaller needle gauges.
- 1/2 inch cannula length keeps the bent tip compact for close bench work.
- Olive hub follows the Techcon TE color code for 14 gauge selection.
- Luer-lock hub attaches to compatible syringe barrels and adapters.
Techcon describes the TE bent line as precision-bent stainless steel cannula tips with double-helix polypropylene hubs. The line is burr-free and electro-polished for consistent material flow, silicone-free, chloride-free, and rated to 100 psi.
14 Gauge Bent Needle Process Fit
Use this tip when the assembly needs a larger bead or faster deposit in a hard-to-reach spot. It is useful for compatible adhesives, sealants, oils, greases, coatings, and other production fluids that can pass through a 14 gauge outlet without excessive pressure. The larger outlet can reduce dispense time on heavier materials when the part geometry still calls for needle-level placement.
Keep the syringe aligned with the access path and avoid pressing the cannula against fixture edges. If flow is uneven, check for cured material, tip damage, or a mismatch between viscosity and gauge before increasing air pressure.
Ordering 14 Gauge Bent Needle Packs
Pair this pack with compatible syringe barrels, pistons, caps, and other Chemical Concepts dispensers, mixers, and nozzles. For manufacturer background on Techcon dispensing products, visit Techcon.
Need help choosing between 45 degree and 90 degree access? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.