Description
This Techcon TS218 dispensing nozzle set of 50 gives a shop or production line enough precision molded tips on hand to keep a sealant dispensing operation running without stopping for a parts order mid job. Each nozzle measures 2.5 inches long with a 1/8 inch orifice and 1/4 inch NPT thread, sized to fit standard pre-filled plastic cartridges of silicone sealant or mount on spool valves.
What This Dispensing Nozzle Set Is Built For
The internal fluid path on this dispensing nozzle set is optimized for throughput, so operators get more sealant out per stroke and finish a bead faster than with a generic nozzle. That translates to lower air pressure needed to drive the same volume of material, which reduces both operating cost and the physical fatigue of running a dispensing gun all shift.
Built for High Volume Use
High density polyethylene construction keeps the nozzles rigid enough to hold their shape under pressure while still allowing an easy manual tip cut before use. Nozzles can be trimmed to the bead width the job calls for, and the reduced bending force needed to seat the nozzle on the cartridge speeds up changeovers between cartridges.
Cartridge and Valve Compatibility
The 1/4 inch NPT thread on this TS218 nozzle fits the wide range of pre-filled silicone sealant cartridges common on production lines, as well as spool valve dispensing setups, so one nozzle spec covers both manual cartridge guns and automated dispensing equipment on the same line.
Where This Dispensing Nozzle Set Fits
This nozzle belongs in Chemical Concepts’ dispensers, mixers, and nozzles category, alongside sausage guns, static mixers, and other dispensing consumables. For the full Techcon product catalog, see Techcon, an OK International company.
Ordering and Support
Chemical Concepts stocks the Techcon TS218 nozzle in sets of 50 and 1000 for higher volume users. Call (800) 220-1966 or email [email protected] to confirm quantity on hand or bulk pricing.
Reviews
There are no reviews yet.