Description
The Mixpac MFQX 10-24T is a disposable QUADRO static mixer for 4:1 and 10:1 F-System cartridges. It has 24 mixing elements in a 10.7 mm bore and measures 181 mm (7.13 in) overall. The 10.7 mm bore is the widest in the MFQX line, which gives the highest flow and the largest bead with the lowest pressure drop through the nozzle.
Specifications
| Property | Value |
|---|---|
| Model | MFQX 10-24T |
| Manufacturer part no. | 116044 |
| Mixing elements | 24 |
| Inner diameter | 10.7 mm (0.42 in) |
| Overall length | 181 mm (7.13 in) |
| Mix ratios | 4:1 and 10:1 |
| Element design | QUADRO, green elements with orange interface |
| Outlet tip | Stepped |
| Connection | F-System twist and lock, mounts directly to cartridge |
| Cartridge family | Mixpac F-System 200 and F-System 400 Industrial |
| Units per box | 600 |
Where the 10-24T fits
- Widest bore in the MFQX line at 10.7 mm. Use it when the joint needs a larger bead than the 8.7 mm sizes lay down, or when a material is thick enough that a narrower bore restricts flow.
- Lowest pressure drop of any MFQX nozzle, which helps on filled or thixotropic materials and on manual guns with lower thrust.
- Full 24 element count, the same as the 07 and 08 stepped tip sizes, so blend quality is comparable across those three.
- At 181 mm it is longer than the 08-24T but still 17 mm shorter than the 08-32D, so the widest bore does not mean the longest nozzle.
- Confirm the wider body clears your fixture and fits your gun holder before ordering a full box.
- Mounts directly to the cartridge with a twist and lock connection. Disposable, so no purging or cleanup between batches.
Compatible cartridges
| Cartridge system | Ratio | Fill volume |
|---|---|---|
| F-System 200 Industrial | 4:1 | 225 ml |
| F-System 200 Industrial | 10:1 | 250 ml |
| F-System 400 Industrial | 4:1 | 415 ml |
| F-System 400 Industrial | 10:1 | 490 ml |
Running a 1:1 or 2:1 cartridge instead? Use the MFQ series with the white interface. The ratios do not interchange.
Related MFQX sizes
| Model | Elements | Bore | Tip | Choose it when |
|---|---|---|---|---|
| MFQX 08-24T | 24 | 8.7 mm | Stepped | Same elements, smaller bead, 26 mm shorter |
| MFQX 10-24T (this page) | 24 | 10.7 mm | Stepped | Widest bore, highest flow, largest bead |
| MFQX 08-32D | 32 | 8.7 mm | Straight | More mixing passes instead of more flow |
| MFQX 07-24T | 24 | 7.5 mm | Stepped | Finest bead with a stepped tip, 44 mm shorter |
See the full MFQX size chart for all six models with lengths, bores, and tip styles.
Common applications
- Higher viscosity two-part adhesives and sealants that resist flow through narrower nozzles
- Larger bead and higher output dispensing from 400 series cartridges
- Filled and thixotropic materials where a narrow bore restricts flow
- Aerospace and aircraft sub-assembly with two-part structural adhesives
- Automotive body, glass, and trim attachment with methacrylate or polyurethane
- Transportation, marine, and composite assembly with structural adhesives
Ordering
The MFQX 10-24T ships in factory boxes of 600 and is ordered in full box quantities. Pair it with matching cartridges and dispensing guns from the dispensers, mixers, and nozzles category.
Frequently asked questions
What does MFQX 10-24T mean?
MFQ is mixer, F-System, QUADRO design. The X marks the 4:1 and 10:1 version with an orange interface. The 10 is the inner diameter rounded down, actually 10.7 mm. The 24 is the number of mixing elements. The T is the stepped outlet tip.
Which MFQX nozzle has the widest bore?
The 10-24T at 10.7 mm. The rest of the line runs 5.3, 7.5, and 8.7 mm. The wider bore gives the highest flow, the largest bead, and the lowest pressure drop through the nozzle.
When should I step up from an 8.7 mm to a 10.7 mm nozzle?
Two reasons. The joint needs a larger bead than the 08-24T lays down, or the material is thick or heavily filled enough that an 8.7 mm bore still restricts flow and the gun labors. If neither applies, the 08-24T is 26 mm shorter and easier to handle.
Is the widest bore also the longest nozzle?
No. The 10-24T is 181 mm, while the 08-32D is 198 mm with a narrower 8.7 mm bore. Element count drives length more than bore diameter does.
Will the MFQX 10-24T work on a 1:1 cartridge?
No. MFQX nozzles are built for 4:1 and 10:1 ratios and carry an orange interface. For 1:1 and 2:1 F-System cartridges, use the MFQ series with the white interface.
Does this nozzle need a converter or retaining nut?
No. The MFQX mounts directly to the F-System cartridge with a twist and lock connection. No converter, no retaining nut, no tools.
Literature and downloads
Need help?
Not sure whether you need the wider bore? Call (800) 220-1966 or email [email protected].












Reviews
There are no reviews yet.