Description
This is the 400ml cartridge of Plexus MA8105 GB, a two-part, 1:1 methacrylate (MMA) structural adhesive for bonding raw and coated metals, nylon and other engineered thermoplastics, and composites. The 400ml size holds eight times the adhesive of the 50ml cartridge, which means fewer cartridge changes on production runs.
Full specifications, cure times, and lap shear data are on the Plexus MA8105 GB structural methacrylate adhesive page.
Package Details
| Property | Value |
|---|---|
| Product | Plexus MA8105 GB structural methacrylate adhesive |
| Size | 400ml cartridge |
| Chemical Concepts SKU | PLX81058 |
| ITW Stock No. | 81058 |
| Mix Ratio | 1:1 by volume |
| Color | Gray |
| Cartridge Length, Bottom to Cap Tip | 8.875 in (225.4 mm) |
| Barrel Length | 7.25 in (184.2 mm) |
| Cartridge Width (Across Both Barrels) | 3.625 in (92.1 mm) |
| Case Order Minimum | 12 each |
Dispensing the 400ml Cartridge
- Guns: Albion B26T400 manual gun or medmix DP2X 400 pneumatic gun. The pneumatic gun needs an air supply.
- Static mixer: MCQ 08-24T Quadro mixer. Attach it to the cartridge and expel a mixer length of adhesive before you apply to the part.
- The working time is 3 to 6 minutes at 75°F. Mixed adhesive left in the nozzle keeps curing, so replace the mix nozzle if you pause longer than the working time.
Frequently Asked Questions
What gun and mixer fit the Plexus MA8105 GB 400ml cartridge?
The 400ml cartridge runs in the Albion B26T400 manual gun or medmix DP2X 400 pneumatic gun, with a MCQ 08-24T Quadro mixer on the cartridge. These are the same guns and mixers we pair with MA8110 and MA8120 in this size.
Is there an order minimum on the 400ml cartridge?
Yes, the 400ml cartridge is sold by the case with a minimum order of 12 each.
How does the 400ml cartridge compare to the 50ml cartridge?
The 400ml cartridge holds eight times as much adhesive as the 50ml cartridge and runs in 400ml guns, while the 50ml runs in 50ml guns. The adhesive is the same. See the Plexus MA8105 GB page for both sizes.
What are the working time and cure time for the 400ml cartridge?
At 75°F the working time is 3 to 6 minutes and the bond reaches 500 psi in 14 to 16 minutes, the same as every MA8105 GB cartridge. The Plexus MA8105 GB page has the full cure table at 60°F, 75°F, and 90°F.
Questions on fit for your galvanized, nylon, or mixed-material bonding job? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.