Description
The Mixpac MFQX 07-24T is a disposable QUADRO static mixer for 4:1 and 10:1 F-System cartridges. It has 24 mixing elements in a 7.5 mm bore and measures 137 mm (5.39 in) overall. It is the smallest stepped tip size in the MFQX line, which makes it the entry point for dispensing straight to the part rather than through a valve or fitting.
Specifications
| Property | Value |
|---|---|
| Model | MFQX 07-24T |
| Manufacturer part no. | 116038 |
| Mixing elements | 24 |
| Inner diameter | 7.5 mm (0.30 in) |
| Overall length | 137 mm (5.39 in) |
| Mix ratios | 4:1 and 10:1 |
| Element design | QUADRO, green elements with orange interface |
| Outlet tip | Stepped |
| Connection | F-System twist and lock, mounts directly to cartridge |
| Cartridge family | Mixpac F-System 200 and F-System 400 Industrial |
| Units per box | 1,500 |
Where the 07-24T fits
- Smallest stepped tip size in the line. If you are dispensing to the part rather than through a fitting, this is the narrowest bead MFQX offers.
- The 7.5 mm bore sits between the 5.3 mm luer sizes and the 8.7 mm models. More flow than the 05 series, finer placement than the 08.
- At 137 mm it is only 5 mm longer than the 05-24L despite the wider bore, so clearance stays easy in tight fixtures.
- Full 24 element count, which is the standard across most of the MFQX line.
- Mounts directly to the cartridge with a twist and lock connection. No converter, no retaining nut, no tools.
- Disposable, so there is no purging or cleanup between adhesive batches.
Compatible cartridges
| Cartridge system | Ratio | Fill volume |
|---|---|---|
| F-System 200 Industrial | 4:1 | 225 ml |
| F-System 200 Industrial | 10:1 | 250 ml |
| F-System 400 Industrial | 4:1 | 415 ml |
| F-System 400 Industrial | 10:1 | 490 ml |
Running a 1:1 or 2:1 cartridge instead? Use the MFQ series with the white interface. The ratios do not interchange.
Related MFQX sizes
| Model | Elements | Bore | Tip | Choose it when |
|---|---|---|---|---|
| MFQX 05-24L | 24 | 5.3 mm | Luer | Same elements, finer bead, feeds a valve or fitting |
| MFQX 07-24T (this page) | 24 | 7.5 mm | Stepped | Smallest stepped tip, finest bead to the part |
| MFQX 08-24T | 24 | 8.7 mm | Stepped | Same elements, more flow, most commonly stocked |
| MFQX 10-24T | 24 | 10.7 mm | Stepped | Widest bore, highest flow, largest bead |
See the full MFQX size chart for all six models with lengths, bores, and tip styles.
Common applications
- Electronics and communications assembly where a small, controlled bead is needed
- Aerospace and aircraft sub-assembly with two-part structural adhesives
- Automotive body, glass, and trim attachment with methacrylate or polyurethane
- Transportation, marine, and composite assembly with structural adhesives
- Dispensing epoxy, polyurethane, silicone, acrylic, and MMA two-part adhesives and sealants
Ordering
The MFQX 07-24T ships in factory boxes of 1,500 and is ordered in full box quantities. Pair it with matching cartridges and dispensing guns from the dispensers, mixers, and nozzles category.
Frequently asked questions
What does MFQX 07-24T mean?
MFQ is mixer, F-System, QUADRO design. The X marks the 4:1 and 10:1 version with an orange interface. The 07 is the inner diameter rounded down, actually 7.5 mm. The 24 is the number of mixing elements. The T is the stepped outlet tip.
What is the smallest MFQX nozzle with a stepped tip?
The MFQX 07-24T at 7.5 mm bore and 137 mm long. The 5.3 mm sizes below it both use a luer tip, which mates with a valve or fitting rather than dispensing to the part.
Should I use the 07-24T or the 08-24T?
Both have 24 elements and a stepped tip, so blend quality and tip style are the same. The 07-24T has a narrower 7.5 mm bore for a finer bead and tighter placement. The 08-24T has an 8.7 mm bore for higher flow and lower pressure drop on thicker materials. Match the bore to the bead your joint needs.
What is a stepped tip?
A stepped tip is a short tapered cone with visible rings, built for dispensing straight onto the part. It is the standard tip across the 07, 08, and 10 bore sizes in the MFQX line. The luer tips on the 05 series are the alternative, and those connect to valves and fittings instead.
Will the MFQX 07-24T work on a 1:1 cartridge?
No. MFQX nozzles are built for 4:1 and 10:1 ratios and carry an orange interface. For 1:1 and 2:1 F-System cartridges, use the MFQ series with the white interface.
Does this nozzle need a converter or retaining nut?
No. The MFQX mounts directly to the F-System cartridge with a twist and lock connection. No converter, no retaining nut, no tools.
Literature and downloads
Need help?
Not sure whether 7.5 mm or 8.7 mm is the right bore? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.