Albion B26T300 B-Line Manual Multi-Component Cartridge Gun

Description

The Albion B26T300 B-Line manual multi-component cartridge gun belongs with **dispensing valve parts** used to apply two-component adhesives from side-by-side cartridges. It is built around a 26:1 drive and is configured for 150 x 150 mL 1:1 cartridges, with included parts for 150 x 75 mL 2:1 packages.

### Where dispensing valve parts fit two-part cartridges

Two-component adhesive dispensing depends on matching the gun, plungers, cartridge ratio, and static mixer before the trigger is pulled. The B26T300 gives assembly teams a manual option when pneumatic equipment is not available or when the job is mobile, intermittent, or outside a fixed dispense cell. It is useful for structural adhesives, repair compounds, epoxies, urethanes, and other materials packaged in paired cartridges.

The high thrust drive helps move thicker materials without asking the operator to squeeze as hard as a light cartridge gun would require. That matters when dispensing across multiple bond lines, when colder shop conditions raise material viscosity, or when a filled adhesive needs steady pressure through a static mixer. The full-size handle gives better grip control during long beads and helps keep the mixer aligned with the joint. Keep compatible mixing nozzle, 2 part mixing nozzle, and jb weld mixing nozzle stock separated by ratio and cartridge family.

### How these dispensing valve parts control ratio

Load the cartridge package only after confirming the ratio parts are set for the package in hand. A 1:1 cartridge needs equal plunger travel, while a 2:1 cartridge uses a smaller side on one component. The conversion hardware should seat cleanly so both components advance at the same time and feed the mixer evenly. Once loaded, purge until both materials reach the outlet, attach the mixer, and dispense a short waste bead before applying adhesive to the assembly.

Albion’s double gripping plates and steel trigger are useful in shops where applicators see daily use. The adjustment screw lets a worn gun be tuned to reduce wasted trigger motion, extending service life for production teams that rely on the same frame across many cartridge batches.

### Specs for Albion dispensing valve parts | SKU | ALB-B26T300 |
| -| -|
| Model | B26T300 B-Line |
| Tool Type | Manual multi-component cartridge gun |
| Drive Ratio | 26:1 |
| Primary Cartridge | 150 x 150 mL, 1:1 |
| Convertible Cartridge | 150 x 75 mL, 2:1 |
| Use | Two-component adhesive dispensing | Choose this gun for mixed adhesive packages that need controlled manual pressure and ratio-specific hardware. Keep matching static mixers and retainers with related [dispensers, mixers, and nozzles](https://www.chemical-concepts.com/product-category/dispensers-mixers-nozzles-3/) so the cartridge, gun, and outlet are released together. For manufacturer context on applicator designs, visit [Albion Engineering](https://www.albioneng.com).

### Need Help?

Need help matching a 1:1 or 2:1 cartridge to the right manual applicator? Call [(800) 220-1966](tel:8002201966) or email [[email protected]](mailto:[email protected]).