Sulzer Medmix DM2X 200 – 200ml Manual Cartridge Gun

The MIXPAC DM2X 200 manual cartridge gun (also searched as Sulzer Mixpac DM2X 200 or Medmix DM2X 200) is a manual dispenser for 200ml MIXPAC C-System and F-System two-part cartridges. Applicators like it because it is easy on the hands, and medmix designed the trigger and brake release for jam-free operation under high force or back pressure. Its dual-drive system balances the force applied to each side of the cartridge, which helps hold the mix ratio through the stroke. Pick your ratio on this page and the gun ships with the matching cartridge tray and plunger disks. A CKX conversion kit changes the ratio later.

Key Product Details

Performance in Production

• The 22:1 thrust ratio and 5.2 kN maximum thrust help move high viscosity two-part materials through the cartridge with less hand effort.
• The trigger and brake release lever are designed for jam-free operation under high force or back pressure, and one hand reaches both controls whether you are right-handed or left-handed.
• The dual-drive system balances the force on each side of the cartridge, which supports consistent metering across a bead.
• The ratio selector switch maximizes mix quality as you move between the supported ratios.
• The cast aluminum frame adds durability and holds the cartridge stable under load, and the cartridge release button makes changes quick at the bench.
• Manual operation suits shops where sparks are not allowed, battery tools cannot be used, or air supply is not possible, and at 3.53 lb the gun hangs from its mounting hook between jobs.

Common Applications

• Solid surface and stone countertop seaming with two-part cartridge adhesives
• Bonding and assembly with two-part cartridge adhesives
• Sealing with two-part cartridge sealants
• Gap filling
• Shimming
• Encapsulation

Available Ratios and SKUs

Select your ratio above and the gun ships set up for it. Conversion kits include the cartridge tray and the A and B plunger disks. See the CKX 200 conversion kits for ordering.

Related Products

• Medmix MIXPAC MCQ 08-24T static mixer for 1:1 and 2:1 C-System cartridges
• Medmix MIXPAC MFQ 08-24T static mixer for 1:1 and 2:1 F-System cartridges
• Xemex X2-C8-8S low-waste static mixer for C-System cartridges, including 4:1 and 10:1
• Medmix MIXPAC MFHX 08-24T static mixer for 4:1 and 10:1 F-System cartridges
• Medmix MIXPAC DP2X 200 pneumatic cartridge gun for air-powered dispensing of 200ml cartridges
• Medmix MIXPAC DM2X 400 manual cartridge gun for 400ml cartridges
• Newborn VR200XSP variable ratio gun as a lower-cost manual option for 200ml cartridges
• More in our dispensers, mixers, and nozzles category

DM2X Dispenser Video

Watch the DM2X dispenser video before you set up your first ratio change.

How to Change the Ratio on a DM2X 200

The DM2X 200 changes ratio with a conversion kit and a selector switch. Here is the shop routine:

• Confirm the ratio on the cartridge label and that the cartridge is a 200ml C-System or F-System body.
• Choose the CKX 200 conversion kit for the new ratio. CKX 200-01-01 covers 1:1 and 2:1, CKX 200-04-01 covers 4:1, and CKX 200-10-01 covers 10:1.
• Swap the cartridge tray and the A and B plunger disks for the new ratio.
• Set the ratio selector switch for the new ratio.
• Load the cartridge and fit a new static mixer that matches the cartridge system and ratio.
• Dispense a short purge bead until the mixed material runs a uniform color, then use the one-hand brake release at the end of the bead.

Follow the medmix instructions supplied with the conversion kit for the exact tray and disk steps.

Frequently Asked Questions

What is the MIXPAC DM2X 200?

The MIXPAC DM2X 200 is a manual dual-drive dispenser for 200ml two-part cartridges. DM2X 200, Medmix DM2X 200, Sulzer Mixpac DM2X 200, DM2X 200-01-52-01, and MIXPAC 200ml manual dispenser all describe the same tool.

Does the DM2X 200 replace the old DM200?

Yes. The DM2X 200 replaced the older DM200 manual dispenser, which was discontinued years ago. Match your old gun by ratio. The DM 200-10 is replaced by the DM2X 200-10-52-01. Call us with your old part number and we will match it.

Which cartridges fit the DM2X 200?

The DM2X 200 fits 200ml MIXPAC C-System and F-System cartridges in 1:1, 2:1, 4:1, and 10:1 ratios. It does not take 400ml cartridges, so use the Medmix MIXPAC DM2X 400 manual cartridge gun for those. If you run 250ml cartridges, call us at (800) 220-1966 before you order so we can confirm fit.

Which DM2X 200 part number do I need for my ratio?

Use DM2X 200-01-52-01 for 1:1 and 2:1 cartridges, DM2X 200-04-52-01 for 4:1, and DM2X 200-10-52-01 for 10:1. Choose the ratio on this page and the matching SKU goes in your cart.

Can one DM2X 200 run all four ratios?

Yes, with conversion kits. The DM2X 200 uses interchangeable cartridge trays and plungers, so a CKX 200 kit converts the same tool to another ratio. See the CKX 200 conversion kits.

What static mixer do I need for the DM2X 200?

The mixer depends on the cartridge, not the gun. C-System and F-System cartridges use different mixer outlets. Use the Medmix MIXPAC MCQ 08-24T static mixer or Medmix MIXPAC MFQ 08-24T static mixer for 1:1 and 2:1 cartridges, and the Xemex X2-C8-8S low-waste static mixer or Medmix MIXPAC MFHX 08-24T static mixer for 4:1 and 10:1.

Should I choose the manual DM2X 200 or the pneumatic DP2X 200?

Choose the manual DM2X 200 where sparks are not allowed, battery tools cannot be used, or air supply is not possible. Choose the Medmix MIXPAC DP2X 200 pneumatic cartridge gun when you want air-powered dispensing. Both use the same 200ml cartridges and CKX 200 conversion kits.

Where is the DM2X 200 made?

Medmix is a Swiss company with US operations in Salem, New Hampshire. For the country of manufacture on the current production run, call us at (800) 220-1966 and we will confirm.

Questions on fit for your cartridge, ratio, or conversion kit? Call (800) 220-1966 or email [email protected].

MIXPAC is a trademark of medmix Switzerland AG.