Sulzer Medmix DP2X 200 – 200ml Pneumatic Cartridge Gun

The MIXPAC DP2X 200 pneumatic cartridge gun (also searched as Sulzer Mixpac DP2X 200 or Medmix DP2X 200) is an air-powered dispenser for 200ml MIXPAC C-System and F-System two-part cartridges. It has an integrated regulator to adjust output force and a quick exhaust with an anti-drip feature to stop oozing at the end of a bead. Pick your ratio on this page and the gun ships with the matching cartridge tray and plunger disks. A CKX conversion kit changes the ratio later.

Key Product Details

Performance in Production

• The air drive does the pushing, which supports fatigue-free operation over long beads and repeat shots, and the trigger is shaped for comfort.
• The integrated regulator lets you adjust output force to suit the material you are dispensing.
• Quick exhaust and the integrated anti-drip feature help prevent oozing and dripping when you release the trigger.
• The indicator rod shows how much material is left in the cartridge, so you can see when to change before a bead runs short.
• One hand reaches the plunger retract button, and the cartridge release button makes cartridge changes quick at the bench.
• At 3.87 lb with a mounting hook, the gun hangs between jobs. It needs a 1/4 in NPT air supply at up to 100 psi.

Common Applications

• Solid surface and stone countertop seaming with two-part cartridge adhesives
• Bonding and assembly with two-part cartridge adhesives
• Sealing with two-part cartridge sealants
• Gap filling
• Shimming
• Encapsulation

Available Ratios and SKUs

Select your ratio above and the gun ships set up for it. Conversion kits include the cartridge tray and the A and B plunger disks. See the CKX 200 conversion kits for ordering.

Related Products

• Medmix MIXPAC MCQ 08-24T static mixer for 1:1 and 2:1 C-System cartridges
• Medmix MIXPAC MFQ 08-24T static mixer for 1:1 and 2:1 F-System cartridges
• Xemex X2-C8-8S low-waste static mixer for C-System cartridges, including 4:1 and 10:1
• Medmix MIXPAC MFHX 08-24T static mixer for 4:1 and 10:1 F-System cartridges
• Sulzer Medmix DM2X 200 – 200ml Manual Cartridge Gun for 200ml cartridges when no air line is available
• Sulzer Medmix DP2X 400 – 400ml Pneumatic Cartridge Gun for 400ml cartridges
• More in our dispensers, mixers, and nozzles category

DP2X Dispenser Video

Watch the DP2X dispenser video before you set up your first ratio change.

How to Change the Ratio on a DP2X 200

The DP2X 200 changes ratio with a conversion kit. Here is the shop routine:

• Disconnect the air supply before you swap any parts.
• Confirm the ratio on the cartridge label and that the cartridge is a 200ml C-System or F-System body.
• Choose the CKX 200 conversion kit for the new ratio. CKX 200-01-01 covers 1:1 and 2:1, CKX 200-04-01 covers 4:1, and CKX 200-10-01 covers 10:1.
• Swap the cartridge tray and the A and B plunger disks for the new ratio.
• Load the cartridge and fit a new static mixer that matches the cartridge system and ratio.
• Reconnect the air, set the regulator, and dispense a short purge bead until the mixed material runs a uniform color.

Follow the medmix instructions supplied with the conversion kit for the exact tray and disk steps.

Frequently Asked Questions

What is the MIXPAC DP2X 200?

The MIXPAC DP2X 200 is a pneumatic dispenser for 200ml two-part cartridges. DP2X 200, Medmix DP2X 200, Sulzer Mixpac DP2X 200, DP2X 200-01-25-01, and MIXPAC 200ml pneumatic dispenser all describe the same tool.

Does the DP2X 200 replace the old DP200?

Yes. The DP2X 200 replaced the older DP200 pneumatic dispenser, which was discontinued years ago. Call us with your old part number and we will match it to the right DP2X 200 ratio.

Which cartridges fit the DP2X 200?

The DP2X 200 fits 200ml MIXPAC C-System and F-System cartridges in 1:1, 2:1, 4:1, and 10:1 ratios. It does not take 400ml cartridges, so use the Sulzer Medmix DP2X 400 – 400ml Pneumatic Cartridge Gun for those. If you run 250ml cartridges, call us at (800) 220-1966 before you order so we can confirm fit.

Which DP2X 200 part number do I need, and can one gun run all four ratios?

Use DP2X 200-01-25-01 for 1:1 and 2:1 cartridges, DP2X 200-04-25-01 for 4:1, and DP2X 200-10-25-01 for 10:1. One gun can run all four ratios with conversion kits, since the DP2X 200 uses interchangeable cartridge trays and plungers. See the CKX 200 conversion kits.

What air supply does the DP2X 200 need?

The DP2X 200 has a 1/4 in NPT air inlet and a maximum operating pressure of 100 psi (6.8 bar). The integrated regulator adjusts output force once the air is connected.

What static mixer do I need for the DP2X 200?

The mixer depends on the cartridge, not the gun. C-System and F-System cartridges use different mixer outlets. Use the Medmix MIXPAC MCQ 08-24T static mixer or Medmix MIXPAC MFQ 08-24T static mixer for 1:1 and 2:1 cartridges, and the Xemex X2-C8-8S low-waste static mixer or Medmix MIXPAC MFHX 08-24T static mixer for 4:1 and 10:1.

Should I choose the pneumatic DP2X 200 or the manual DM2X 200?

Choose the pneumatic DP2X 200 when you have an air line and want air-powered dispensing with a regulator. Choose the Sulzer Medmix DM2X 200 – 200ml Manual Cartridge Gun where sparks are not allowed, battery tools cannot be used, or air supply is not possible. Both use the same 200ml cartridges and CKX 200 conversion kits.

Where is the DP2X 200 made?

Medmix is a Swiss company with US operations in Salem, New Hampshire. For the country of manufacture on the current production run, call us at (800) 220-1966 and we will confirm.

Questions on fit for your cartridge, ratio, or conversion kit? Call (800) 220-1966 or email [email protected].

MIXPAC is a trademark of medmix Switzerland AG.