Description
Permabond TA4605 in the 50ml Cartridge
This is the 50ml dual cartridge of Permabond TA4605, a two-part 1:1 toughened structural acrylic that bonds untreated polypropylene, polyethylene (HDPE, LDPE, UHMW) and PTFE with no flame, corona, plasma or primer treatment.
The 50ml size fits trial work, prototyping, maintenance repair, and low to moderate volume assembly. Because TA4605 has a 2 to 4 minute pot life, a smaller cartridge also means less material sitting in a partially used tube between jobs. For full product data, shear strength on every tested substrate, and grade selection across the series, see the Permabond TA4605 product page.
Key Product Details
| Property | Value |
|---|---|
| Product | Permabond TA4605 |
| Package Size | 50ml |
| Package Type | Dual cartridge, side by side |
| Full Case Quantity | 10 |
| Chemistry | Two-part toughened structural acrylic, methacrylate both parts |
| Mix Ratio | 1:1 |
| Mixed Color | Off-white |
| Pot Life at 23°C | 2 to 4 minutes |
| Fixture Time at 23°C | 5 to 10 minutes |
| Full Cure at 23°C | 24 hours |
| Maximum Gap Fill | 1 mm (0.04 in) |
| Storage Temperature | 5 to 25°C (41 to 77°F) |
| Related Composite Product | Permabond TA4605 |
What You Need to Dispense It
- Static mixer: MBQ 05-16L. One per bead run. Adhesive cures inside the mixer, so plan on a fresh nozzle each time work stops.
- Dispensing gun: Chem-Set PAK-50 fitted with the 1:1 / 2:1 plunger.
- Order single cartridges or full cases. There is no order minimum.
Common Applications
- Trial and qualification work before committing to a production size
- Maintenance and repair on HDPE, polypropylene and UHMW parts
- Small assembly bonding and prototype builds
- Rubber bonding on EPDM, nitrile, neoprene and butyl
- Bonding polyolefins to aluminium, composites and e-coated metals
Related Products
- Permabond TA4605 in the 400ml cartridge for higher-volume dispensing
- Permabond TA4605 in 20 kg bulk for meter-mix equipment
- MBQ 05-16L static mixers
- Chem-Set PAK-50 dispensing gun
- Low surface energy plastic bonding guide
Reviews
There are no reviews yet.