Description
Permabond TA4610 in the 50ml Cartridge
This is the 50ml dual cartridge of Permabond TA4610, a two-part 1:1 toughened structural acrylic that bonds untreated polyethylene (HDPE, LDPE, UHMW), polypropylene and PTFE with no flame, corona, plasma or primer treatment.
TA4610 gives 12 to 15 minutes of fixture time and 40 to 50 minutes to handling strength, so there is room to position a part before the joint sets. The 50ml size suits trial work, field repair and lower-volume assembly, including submerged repair where TA4610’s underwater bonding matters. For full product data, shear strength on every tested substrate, and grade selection across the series, see the Permabond TA4610 product page.
Key Product Details
| Property | Value |
|---|---|
| Product | Permabond TA4610 |
| Package Size | 50ml |
| Package Type | Dual cartridge, side by side |
| Full Case Quantity | 10 |
| Chemistry | Two-part toughened structural acrylic, methacrylate both parts |
| Mix Ratio | 1:1 |
| Mixed Color | Off-white |
| Pot Life at 23°C | 5 to 8 minutes |
| Fixture Time at 23°C | 12 to 15 minutes |
| Handling Time at 23°C | 40 to 50 minutes |
| Full Cure at 23°C | 48 hours |
| Maximum Gap Fill | 1 mm (0.04 in) |
| Water Resistance | Bonds underwater |
| Storage Temperature | 5 to 25°C (41 to 77°F) |
| Related Composite Product | Permabond TA4610 |
What You Need to Dispense It
- Static mixer: MBQ 05-16L. One per bead run. Adhesive cures inside the mixer, so plan on a fresh nozzle each time work stops.
- Dispensing gun: Chem-Set PAK-50 fitted with the 1:1 / 2:1 plunger.
- Order single cartridges or full cases. There is no order minimum.
Common Applications
- Trial and qualification work before committing to a production size
- Field and maintenance repair on HDPE, polypropylene and UHMW parts
- Submerged and wet-service repair where the bond will see water
- Bonding PTFE to stainless steel and mild steel
- Composite bonding on epoxy FRP, polyester GRP and carbon fibre
- Rubber bonding on EPDM, nitrile, neoprene and butyl
Related Products
- Permabond TA4610 in the 400ml cartridge for higher-volume dispensing
- Permabond TA4605 for faster fixture on smaller assemblies
- MBQ 05-16L static mixers
- Chem-Set PAK-50 dispensing gun
- Low surface energy plastic bonding guide
Reviews
There are no reviews yet.