Description
Permabond TA4611 in the 400ml Cartridge
This is the 400ml dual cartridge of Permabond TA4611, a two-part 1:1 toughened structural acrylic that bonds untreated polypropylene, polyethylene (HDPE, LDPE, UHMW) and PTFE with no flame, corona, plasma or primer treatment.
The 400ml is the production package. At 21,500 cP mixed, TA4611 is far easier to push than TA4605 or TA4610 in this size, which matters when an operator is running cartridges all shift. No micro beads means parts still seat tight on close-tolerance work. For full product data, shear strength on every tested substrate, and grade selection across the series, see the Permabond TA4611 product page.
Key Product Details
| Property | Value |
|---|---|
| Product | Permabond TA4611 |
| Package Size | 400ml |
| Package Type | Dual cartridge, side by side |
| Full Case Quantity | 6 |
| Chemistry | Two-part toughened structural acrylic, methacrylate both parts |
| Mix Ratio | 1:1 |
| Mixed Color | Transparent to pale yellow |
| Mixed Viscosity at 25°C | 21,500 cP |
| Pot Life at 23°C | 4 to 6 minutes |
| Fixture Time at 23°C | 10 to 16 minutes |
| Handling Time at 23°C | 40 to 50 minutes |
| Full Cure at 23°C | 24 to 36 hours |
| Maximum Gap Fill | 0.5 mm (0.02 in). Contains no micro beads |
| Storage Temperature | 5 to 25°C (41 to 77°F) |
| Related Composite Product | Permabond TA4611 |
What You Need to Dispense It
- Static mixer: one MFQ 08-24T ships with the cartridge. Order spares for production runs. The 400ml takes a different mixer than the 25ml and 50ml, so check before you order.
- Manual gun: Albion B26T400 hand-held applicator.
- Pneumatic gun: DP2X 400 for continuous production dispensing.
- Order single cartridges or full cases. There is no order minimum.
Common Applications
- Production assembly of close-tolerance plastic components
- Visible and cosmetic joints on production runs where bond line appearance matters
- Metal to metal bonding on mild steel and stainless steel
- Bonding polyolefins to mild steel, stainless steel and aluminium
- Composite bonding on carbon fibre, epoxy FRP and polyester GRP
- Replacing mechanical fasteners or welded joints on plastic assemblies
Related Products
- Permabond TA4611 in the 50ml cartridge for regular assembly work
- Permabond TA4611 in the 25ml hand syringe, no gun required
- Permabond TA4631 for low-odor work areas and underwater bonding
- MFQ 08-24T static mixers
- Albion B26T400 manual gun
- DP2X 400 pneumatic gun
- Low surface energy plastic bonding guide
Reviews
There are no reviews yet.