Description
This is the 50ml cartridge of Plexus MA8105 GB, a two-part, 1:1 methacrylate (MMA) structural adhesive for bonding raw and coated metals, nylon and other engineered thermoplastics, and composites. The 50ml size is the smaller of the two cartridges and runs in a handheld gun, which suits smaller assemblies, trials, and repair work.
Full specifications, cure times, and lap shear data are on the Plexus MA8105 GB structural methacrylate adhesive page.
Package Details
| Property | Value |
|---|---|
| Product | Plexus MA8105 GB structural methacrylate adhesive |
| Size | 50ml cartridge |
| Chemical Concepts SKU | PLX81057 |
| ITW Stock No. | 81057 |
| Mix Ratio | 1:1 by volume |
| Color | Gray |
| Cartridge Length, Bottom to Cap Tip | 4.625 in (117.5 mm) |
| Barrel Length | 3.81 in (96.8 mm) |
| Cartridge Width | 1.875 in (47.6 mm) |
| Case Order Minimum | 12 each |
Dispensing the 50ml Cartridge
- Guns: Chem-Set PAK-50 manual dispense gun or Chem-Set PAK-50 electric battery dispense gun.
- Static mixer: MAQ 05-24L Quadro mixer. Attach it to the cartridge and expel a mixer length of adhesive before you apply to the part.
- The working time is 3 to 6 minutes at 75°F. Mixed adhesive left in the nozzle keeps curing, so replace the mix nozzle if you pause longer than the working time.
Frequently Asked Questions
What gun and mixer fit the Plexus MA8105 GB 50ml cartridge?
The 50ml cartridge runs in the Chem-Set PAK-50 manual dispense gun or Chem-Set PAK-50 electric battery dispense gun, with a MAQ 05-24L Quadro mixer on the cartridge. These are the same guns and mixers we pair with MA8110 and MA8120 in this size.
Is there an order minimum on the 50ml cartridge?
Yes, the 50ml cartridge is sold by the case with a minimum order of 12 each.
How does the 50ml cartridge compare to the 400ml cartridge?
The 400ml cartridge holds eight times as much adhesive and runs in 400ml guns, while the 50ml cartridge runs in 50ml guns. The adhesive is the same. See the Plexus MA8105 GB page for both sizes.
What are the working time and cure time for the 50ml cartridge?
At 75°F the working time is 3 to 6 minutes and the bond reaches 500 psi in 14 to 16 minutes, the same as every MA8105 GB cartridge. The Plexus MA8105 GB page has the full cure table at 60°F, 75°F, and 90°F.
Questions on fit for your galvanized, nylon, or mixed-material bonding job? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.