Description
The Mixpac MFQX 08-24T is a disposable QUADRO static mixer for 4:1 and 10:1 F-System cartridges. It has 24 mixing elements in an 8.7 mm bore and measures 155 mm (6.10 in) overall. It sits in the middle of the MFQX line on both flow and bead size, which makes it the common starting point when a two-part adhesive has no unusual demands.
Specifications
| Property | Value |
|---|---|
| Model | MFQX 08-24T |
| Manufacturer part no. | 116039 |
| Mixing elements | 24 |
| Inner diameter | 8.7 mm (0.34 in) |
| Overall length | 155 mm (6.10 in) |
| Mix ratios | 4:1 and 10:1 |
| Element design | QUADRO, green elements with orange interface |
| Outlet tip | Stepped |
| Connection | F-System twist and lock, mounts directly to cartridge |
| Cartridge family | Mixpac F-System 200 and F-System 400 Industrial |
| Units per box | 750 |
Where the 08-24T fits
- Middle of the range on bore and the standard 24 element count, which is why it is the most commonly ordered MFQX size.
- The 8.7 mm bore handles most bead sizes without the placement limits of the 5.3 and 7.5 mm nozzles or the volume of the 10.7 mm.
- At 155 mm it is shorter than every comparable helix nozzle in the MFHX line, which matters when fixture clearance is tight.
- Stepped tip dispenses straight onto the part. If your setup feeds a valve or fitting instead, the 05 series luer sizes are the ones that mate.
- Mounts directly to the cartridge with a twist and lock connection. No converter, no retaining nut, no tools.
- Disposable, so there is no purging or cleanup between adhesive batches.
Compatible cartridges
| Cartridge system | Ratio | Fill volume |
|---|---|---|
| F-System 200 Industrial | 4:1 | 225 ml |
| F-System 200 Industrial | 10:1 | 250 ml |
| F-System 400 Industrial | 4:1 | 415 ml |
| F-System 400 Industrial | 10:1 | 490 ml |
Running a 1:1 or 2:1 cartridge instead? Use the MFQ series with the white interface. The ratios do not interchange.
Related MFQX sizes
| Model | Elements | Bore | Tip | Choose it when |
|---|---|---|---|---|
| MFQX 07-24T | 24 | 7.5 mm | Stepped | Same elements, finer bead, 18 mm shorter |
| MFQX 08-24T (this page) | 24 | 8.7 mm | Stepped | Balanced flow and bead, common default |
| MFQX 08-32D | 32 | 8.7 mm | Straight | Same bore, eight more elements, straight tip |
| MFQX 10-24T | 24 | 10.7 mm | Stepped | Same elements, larger bead, higher flow |
See the full MFQX size chart for all six models with lengths, bores, and tip styles.
Common applications
- Electronics and communications assembly
- Aerospace and aircraft sub-assembly with two-part structural adhesives
- Automotive body, glass, and trim attachment with methacrylate or polyurethane
- Transportation, marine, and composite assembly with structural adhesives
- Wind turbine blade assembly, repair, and field service
- Dispensing epoxy, polyurethane, silicone, acrylic, and MMA two-part adhesives and sealants
Ordering
The MFQX 08-24T ships in factory boxes of 750 and is ordered in full box quantities. Pair it with matching cartridges and dispensing guns from the dispensers, mixers, and nozzles category.
Frequently asked questions
What does MFQX 08-24T mean?
MFQ is mixer, F-System, QUADRO design. The X marks the 4:1 and 10:1 version with an orange interface. The 08 is the inner diameter rounded down, actually 8.7 mm. The 24 is the number of mixing elements. The T is the stepped outlet tip.
Which MFQX size is the most common?
The 08-24T. The 8.7 mm bore and 24 elements sit in the middle of the line on both flow and mixing, so it is the usual starting point. If the bead is too large for the joint, step down to the 07-24T. If the material streaks or cures unevenly, step up to the 08-32D.
What is the difference between the MFQX 08-24T and the MFHX 08-24T?
Both fit the same 4:1 and 10:1 F-System cartridges but use different element designs. The MFQX uses square QUADRO elements in a square housing with an 8.7 mm bore at 155 mm long. The MFHX 08-24T uses round helix elements with an 8.0 mm bore at 234 mm long. The QUADRO version is 79 mm shorter, which matters in tight fixtures.
Is there a greenLine version of this nozzle?
Yes. medmix offers the MFQX 08-24T-S13, part 189010, built from recycled content rather than virgin plastics. Dimensions, element count, and box quantity are identical to the standard 08-24T. It is not a stocked item at Chemical Concepts. Call (800) 220-1966 for availability and lead time.
Will the MFQX 08-24T work on a 1:1 cartridge?
No. MFQX nozzles are built for 4:1 and 10:1 ratios and carry an orange interface. For 1:1 and 2:1 F-System cartridges, use the MFQ series with the white interface.
Does this nozzle need a converter or retaining nut?
No. The MFQX mounts directly to the F-System cartridge with a twist and lock connection. No converter, no retaining nut, no tools.
Related products
- Xemex X2-FZ8-8S low-waste static mixer, a US-made F-style alternative to the MFQX 08-24T
- Mixpac MFHX helix static mixers for the same cartridges in a round helix design
- Matching cartridges and dispensing guns in the dispensers, mixers, and nozzles category
Literature and downloads
Need help?
Not sure whether to step up or down from the 08-24T? Call (800) 220-1966 or email [email protected].












Reviews
There are no reviews yet.