Permabond

Permabond ET5147 Food Grade Epoxy

SKU: Permabond ET5147

  • Expert Support

  • 50+ Years of Experience

  • Same Day Shipping*

*On in-stock items, placed by 2pm EST

Ask An Expert

Our engineers are ready to help!

Get In Touch Now

Description

Permabond ET5147 food grade epoxy is a 2:1 two-part epoxy adhesive formulated for FDA and EU food contact use (FDA 175.105 and 175.300, EU Plastics Regulation 10/2011). It is designed for structural bonding of metal, wood, composites, and certain plastics where the cured adhesive contacts food or beverage.

Permabond lists ET5147 for water and beverage filters, mesh filters and sieves for food processing, and food preparation and kitchen equipment. Each cartridge ships with a static mixer, and the 2:1 ratio needs a gun and plunger set up for 2:1 cartridges.

Key Product Details

Property Value
Chemistry Two-component epoxy (Part A epoxy resin, Part B polyamine hardener)
Mix Ratio by Volume 2:1
Color Part A white, Part B ivory (mixed: off-white)
Mixed Consistency Thixotropic paste
Viscosity at 77°F (25°C), Part A 20 rpm: 25,000-40,000 mPa.s (cP)
2 rpm: 80,000-160,000 mPa.s (cP)
Viscosity at 77°F (25°C), Part B 20 rpm: 90,000-150,000 mPa.s (cP)
2 rpm: 150,000-300,000 mPa.s (cP)
Specific Gravity Part A 1.3, Part B 1.2
Maximum Gap Fill 0.08 in (2 mm)
Pot Life at 73°F (23°C), 2 g + 1 g 40-60 minutes
Handling Time at 73°F (23°C) 3-5 hours
Working Strength 16 hours at 73°F (23°C)
30 minutes at 140°F (60°C)
Full Cure 72 hours at 73°F (23°C)
1 hour at 140°F (60°C)
Shear Strength, Mild Steel (ISO 4587) 2600-2900 psi (18-20 N/mm²)
Shear Strength, Stainless Steel 2200-2800 psi (15-19 N/mm²)
Shear Strength, Aluminum 1450-2000 psi (10-14 N/mm²)
Peel Strength, Aluminum (ISO 4578) 9-16 PIW (40-70 N/25 mm)
Hardness (ISO 868) 68-72 Shore D
Glass Transition Temperature (Tg) 122-140°F (50-60°C)
Dielectric Strength 15-25 kV/mm
Temperature Range -40 to +250°F (-40 to +120°C)
Food Contact Compliance FDA 175.105 and 175.300; EU Plastics Regulation 10/2011 (a sub-section of EU Framework Regulation 1935/2004)
Storage Temperature 41 to 77°F (5 to 25°C)
Packaging 50ml cartridge, 400ml cartridge

Performance in Production

  • The 40 to 60 minute pot life gives you time to apply to one substrate and join the parts. Per the TDS, parts must be joined inside that window, and larger quantities or higher temperatures shorten it.
  • Handling time is 3 to 5 hours, and the TDS calls for clamping for 5 hours or until handling strength is reached. Plan fixture time and cure racks around that, not around the 72 hour full cure.
  • Heat shortens the schedule. A 30 minute cure at 140°F (60°C) reaches working strength that takes 16 hours at room temperature, and per the TDS every 8°C increase halves the cure time.
  • The 2:1 ratio is set by the dual cartridge, and each cartridge ships with a static mixer, so you do not weigh or hand mix. Use a gun and plunger made for 2:1 cartridges.
  • Thixotropic paste with a 0.08 in (2 mm) maximum gap fill stays where you put it on the joint. Gaps wider than that are outside the data, so call us before bonding loose-fitting parts.
  • Joint strength drops as temperature rises. The TDS hot strength curve (tested on mild steel) shows strength retention falling with temperature, and brief higher exposures such as paint baking or wave soldering are acceptable only if the joint is not unduly stressed. Test at your service temperature.
  • In Permabond filter literature, ET5147 is the grade used on a stainless steel mesh panel for a chocolate processing machine, where the cured adhesive is described as tack-free, inert, and resistant to cleaning chemicals.

Common Applications

  • Water filters and industrial beverage filters
  • Mesh filters and sieves for food processing
  • Production line food preparation and kitchen equipment
  • Bonding and sealing food contact equipment and appliances
  • Structural bonding of metal, wood, composites, and certain plastics
  • Stainless steel, mild steel, and aluminum assemblies

Available Sizes

Package SKU Manufacturer Number Includes
50ml Cartridge PERET05147K050C0101 ET05147K050C0101 Static mixer
400ml Cartridge PERET05147K400C0101 ET05147K400C0101 Static mixer

Related Products

How to Bond With a Food Grade Two-Part Epoxy

Bonding with ET5147 follows the standard two-part epoxy sequence in the Permabond TDS: clean the surfaces, mix through a static mixer, join inside the pot life, clamp, and let it cure.

  • Clean and degrease. Surfaces should be clean, dry, and grease-free. Use a suitable solvent such as acetone or isopropanol.
  • Abrade where the substrate needs it. Aluminum, copper, and copper alloys benefit from light abrasion with emery cloth or similar to remove the oxide layer.
  • Load the cartridge. Insert the dual cartridge into a 2:1 application gun and guide the plunger into the cartridge. Remove the cap and dispense until both sides are flowing, then attach the static mixer that ships with the cartridge and start dispensing.
  • Apply to one substrate.
  • Join the parts within the 40 to 60 minute pot life.
  • Clamp for 5 hours or until handling strength is reached.
  • Let it cure. Full cure takes 72 hours at room temperature. Heat can be used to accelerate the cure.

Permabond publishes shear strength data for mild steel, stainless steel, and aluminum. The TDS also lists wood, composites, and certain plastics. Do not use ET5147 with strong oxidizing materials.

Frequently Asked Questions

What is Permabond ET5147 food grade epoxy used for?

ET5147 is used for structural bonding of metal, wood, composites, and certain plastics where the cured adhesive may contact food or beverage. Permabond lists it for water filters, industrial beverage filters, mesh filters and sieves for food processing, and food preparation and kitchen equipment. Two-part epoxy, 2-component epoxy, and 2:1 epoxy all describe the same type of product.

Is Permabond ET5147 FDA and EU compliant and food safe?

Yes. ET5147 is formulated to meet FDA 175.105 and 175.300 and EU Plastics Regulation 10/2011, a sub-section of EU Framework Regulation 1935/2004. Food grade epoxy, food safe epoxy, and food contact epoxy are used interchangeably in the trade. If your customer or auditor needs documentation, call us and we will get it from Permabond.

What is the mix ratio of ET5147, and what gun do I need?

ET5147 mixes 2:1 by volume, so you need a gun and plunger set up for 2:1 cartridges. A 1:1-only gun will not meter it correctly. The 50ml and 400ml guns we list for 1:1 and 2:1 cartridges are in the Related Products section above.

Can ET5147 be used on filters, strainers, and sieves?

Yes. Permabond lists ET5147 for water filters, industrial beverage filters, and mesh filters and sieves for food processing, and describes the cured adhesive as resistant to cleaning chemicals. Permabond advises avoiding strong acids and alkalis, and the TDS says not to use it with strong oxidizing materials. Call us with your assembly and cleaning chemicals so we can confirm the grade.

How long does ET5147 take to cure?

At room temperature ET5147 reaches working strength in 16 hours and full cure in 72 hours. At 140°F (60°C) working strength takes 30 minutes and full cure takes 1 hour. Pot life is 40 to 60 minutes at 73°F (23°C), so join the parts inside that window.

Can ET5147 bond stainless steel, ceramic, or glass?

Yes for stainless steel. The TDS lists 2200 to 2800 psi shear strength on stainless steel, 2600 to 2900 psi on mild steel, and 1450 to 2000 psi on aluminum. Permabond lists ceramics and glass among the substrates for its food grade epoxies, so test on your part before you commit to production.

What temperature can ET5147 handle?

Permabond lists a temperature range of -40 to +250°F (-40 to +120°C) for ET5147. The cured adhesive has a glass transition temperature of 122 to 140°F (50 to 60°C), and the TDS hot strength curve shows strength falling as temperature rises. Brief higher exposures such as paint baking and wave soldering are acceptable if the joint is not unduly stressed, so test at your service temperature.

What is the difference between ET5147 and ET5145?

The mix ratio is the first difference: ET5147 is 2:1 and Permabond ET5145 is 1:1. The table below compares the two food grade epoxies using Permabond TDS values and the Permabond food grade flyer for the temperature range. See the ET5145 page for its full data.

Property Permabond ET5145 Permabond ET5147
Mix Ratio by Volume 1:1 2:1
Mixed Consistency Thixotropic paste Thixotropic paste
Maximum Gap Fill 0.08 in (2 mm) 0.08 in (2 mm)
Pot Life at 73°F (23°C) 50-80 minutes 40-60 minutes
Working Strength at 73°F (23°C) 16 hours 16 hours
Working Strength at 140°F (60°C) 30 minutes 30 minutes
Hardness (Shore D) 75-85 68-72
Shear Strength, Mild Steel 2800-3000 psi (19-21 N/mm²) 2600-2900 psi (18-20 N/mm²)
Shear Strength, Stainless Steel 2600-3000 psi (18-21 N/mm²) 2200-2800 psi (15-19 N/mm²)
Peel Strength, Aluminum 7-11 PIW (30-50 N/25 mm) 9-16 PIW (40-70 N/25 mm)
Glass Transition Temperature (Tg) 104-122°F (40-50°C) 122-140°F (50-60°C)
Temperature Range -40 to +175°F (-40 to +80°C) -40 to +250°F (-40 to +120°C)

Questions on fit for your food contact bonding application? Call (800) 220-1966 or email [email protected].

Additional information

Weight 1 lbs
Dimensions 6 × 6 × 6 in
Manufacturer

Component

Ratio

Must Ship Freight

Origin

Reviews

There are no reviews yet.

Be the first to review “Permabond ET5147 Food Grade Epoxy”

Your email address will not be published. Required fields are marked *

You may also like…