Description
This Chem-Set 6105 50ml cartridge is a two-part, 1:1 toughened acrylic for HDPE, polypropylene, and polyethylene that needs no primer and no flame, plasma, or corona treatment.
The 50ml size suits repair work, prototype bonds, and trying 6105 on your own parts before you move to the 400ml cartridge. It includes one mixing nozzle. Specs, shear strength data, and the step-by-step bonding process are on the Chem-Set 6105 page.
Package Details
| Property | Value |
|---|---|
| Product | Chem-Set 6105 LSE Polyolefin Bonder |
| Size | 50ml |
| Package Type | Two-part 1:1 cartridge |
| SKU | CCA6105-50 |
| Mix Ratio | 1:1 |
| Chemistry | Two-part toughened acrylic, methacrylate |
| Color | Mixed off-white |
| Includes | One mixing nozzle |
| Related Composite Product | Chem-Set 6105 LSE Polyolefin Bonder |
What You Need to Dispense It
The 50ml cartridge runs in a 50ml 1:1 dispensing gun. Chem-Set 6105 and Chem-Set 6110 use the same guns and mixing tips.
| Extra Mixing Tips | Manual Gun | Battery Gun |
|---|---|---|
| Sulzer MBQ 05-16L mixing tips | CCH50G 50ml manual dispensing gun | Chem-Set PAK 50 electric 50ml battery gun |
Performance in Production
- Short pot life means you mix through the nozzle and assemble the joint right away. Mixed adhesive left in the nozzle will cure, so fit a fresh nozzle for the next use.
- A small package limits waste when you only need a few joints or want to validate a bond before ordering production quantities.
- Same formula and data sheet values as the 400ml cartridge, so results carry over when you scale up.
- No primer or surface treatment is needed. Surfaces still need to be clean, dry, and grease-free.
Related Products
- Chem-Set 6105 LSE Polyolefin Bonder: full specs, shear strength data, and the bonding process for every size
- Chem-Set 6110 LSE Polyolefin Bonder: the companion 1:1 grade with a longer pot life and slower set
Frequently Asked Questions
What gun and mixing tip do I need for the 50ml Chem-Set 6105 cartridge?
The 50ml cartridge runs in a 50ml 1:1 dispensing gun, either the CCH50G manual gun or the Chem-Set PAK 50 battery gun. Extra tips are the Sulzer MBQ 05-16L.
Does the 50ml cartridge include a mixing nozzle?
Yes. Each 50ml cartridge includes one mixing nozzle. Mixed adhesive sets in the nozzle, so keep extra tips on hand if you stop longer than the pot life.
Is the 50ml cartridge the same adhesive as the 400ml cartridge?
Yes. Both are Chem-Set 6105 with the same 1:1 mix ratio and data sheet values. Only the package size and the gun and tip change.
Can I bond King StarBoard with the 50ml cartridge?
Yes. Chem-Set 6105 is developed to bond HDPE, polypropylene, and polyethylene with no primer or surface treatment, and King Plastic names it among the adhesives to use on King StarBoard when an adhesive is necessary. See the Chem-Set 6105 page for lap shear data and the bonding steps.
Boat owners buying small quantities for personal use can see the Marine Repair Kit listing on Amazon.
Questions on fit for your HDPE or polypropylene bonding application? Call (800) 220-1966 or email [email protected].
King StarBoard is a registered trademark of King Plastic Corporation. Chem-Set is a trademark of Chemical Concepts, Inc. Chemical Concepts is not affiliated with King Plastic Corporation.
Reviews
There are no reviews yet.