Description
This 404ml CX cartridge holds LORD 406/19, a two-component structural acrylic that replaces welding, brazing, and riveting. CX is a co-axial cartridge, meaning the accelerator sits inside a sleeve within the adhesive rather than beside it in a twin barrel. It runs in a co-axial gun, not the side by side 400 series guns used for the 415ml.
Pick the CX when you are past the trial stage and running real bead length, but your shop is already set up with co-axial dispensing equipment. It yields roughly eight times what a 50ml cartridge does.
Key Product Details
| Property | Value |
|---|---|
| Product | LORD 406 acrylic adhesive with LORD Accelerator 19 |
| Package Size | 404ml |
| Package Type | CX co-axial cartridge |
| LORD Part Number | 3021011 |
| Mix Ratio by Volume | 4:1 |
| Cured Color | Tan to green |
| Working Time @ 75°F | 6 to 10 minutes |
| Handling Strength @ 75°F | 12 to 17 minutes |
| Shelf Life | 9 months below 80°F, unopened |
| Certification | UL 746C |
How Much Will a CX Cartridge Cover?
Parker LORD publishes bead length at 400ml, which is the closest figure to the 404ml CX. Actual yield runs slightly above these numbers. Figures include roughly 10 percent excess for surface irregularities.
| Bead Diameter | Bead Length at 400ml |
|---|---|
| 1/8 in (3 mm) | 165.5 ft (50.4 m) |
| 1/4 in (6 mm) | 41.4 ft (12.6 m) |
| 3/8 in (9.5 mm) | 18.4 ft (5.6 m) |
Dispensing the CX Cartridge
| Item | Detail |
|---|---|
| Gun | Cox CCM 380 CX set to 4:1, Albion B26C380X4, or LORD-Pak 3004487 |
| Static Mixer | TAH 160-824, or LORD 3001173 |
| LORD Mix Tip Size | 0.34 in x 5.8 in, 24 elements |
| Plunger | Not required. CX cartridges do not use a separate ratio plunger. |
Where the CX Size Fits
- Production metal bonding on shops already running co-axial guns
- Long continuous beads on panels, cabinets, and enclosures
- Operations standardized on the 0.34 in mix tip shared with 200ml and 210ml cartridges
- Cutting cartridge changeovers on high bead length assemblies
Common Questions
What does CX mean on a LORD cartridge?
CX is Parker LORD’s co-axial cartridge format. The accelerator sits in an inner sleeve surrounded by the adhesive, rather than in a second barrel beside it. Co-axial cartridges hold more material in a package that fits a single barrel gun, but they need a co-axial applicator.
Can I run a CX cartridge in my 415ml gun?
No. The 415ml is a side by side twin cartridge and needs a 400 series 4:1 gun. The CX needs a co-axial gun. The two formats are not interchangeable, so match the gun to the cartridge before ordering.
Is the CX the same adhesive as the 50ml and 415ml?
Identical. Same adhesive, same accelerator, same 4:1 ratio, same cured performance. Only the cartridge format and dispensing hardware differ.
Related Products
- LORD 406/19 Structural Acrylic Adhesive (4:1) for full specs, bond data, and all sizes
- 50ml cartridge for repairs and bond trials
- 415ml side by side cartridge for 400 series guns
- Cox CCM 380 CX Applicator Gun
- TAH 160-824 Static Mixer
Reviews
There are no reviews yet.