Medmix MIXPAC MBHX 05-20T Static Mixer, 4:1 and 10:1

Description

Static mixer MBHX 05-20T is a compact Medmix MIXPAC B-System mixing nozzle for compatible 4:1 and 10:1 two-component cartridges. Its interlock inlet aligns the separate component paths at the cartridge outlet, and 20 helical elements blend the material before it exits the stepped tip. The configuration is sized for small dual cartridges where precise fit matters as much as mixer length.

Static Mixer Fitment and Compatibility

Match this mixer to a MIXPAC B-System outlet with the correct high-ratio component arrangement. Manufacturer article 116477 has a 5.4 mm internal diameter and 2.07 mL waste volume. The MBHX family serves 4:1 and 10:1 systems, while visually similar MBH articles serve lower ratios. Confirm the cartridge code and ratio rather than relying only on the body color or outside diameter.

Static Mixer Ordering Format

The page sells this mixer as an individual unit for replacement, sampling, and low-volume assembly. Bulk box quantities support production purchasing and replenishment planning. Plan one fresh static mixing nozzle per cartridge or dispensing interval when the material can cure inside the elements. This protects mix quality and limits the force required at the next startup.

Before attaching the tip, clean the cartridge outlet and verify that both components can flow. Push the interlock connection fully into place, secure it, and purge material until the bead is uniform. Stop dispensing if resistance rises suddenly. A blocked outlet, cured compound, cold material, or incompatible tip can create excess pressure. Replace an obstructed 2 part mixing nozzle rather than forcing the tool.

Specifications

Browse Chemical Concepts dispensers, mixers, and nozzles for related B-System hardware. Consult Medmix MIXPAC system resources for cartridge, ratio, and accessory references.

Need Help?

Need help verifying a B-System cartridge, interlock outlet, or mix ratio? Call (800) 220-1966 or email [email protected].