Description
Permabond TA4611 in the 50ml Cartridge
This is the 50ml dual cartridge of Permabond TA4611, a two-part 1:1 toughened structural acrylic that bonds untreated polypropylene, polyethylene (HDPE, LDPE, UHMW) and PTFE with no flame, corona, plasma or primer treatment.
The 50ml is the working size for regular assembly and repair. TA4611 contains no micro beads, so nothing holds the joint open on close-fitting parts, and at 21,500 cP mixed it dispenses easily through a manual gun. For full product data, shear strength on every tested substrate, and grade selection across the series, see the Permabond TA4611 product page.
Key Product Details
| Property | Value |
|---|---|
| Product | Permabond TA4611 |
| Package Size | 50ml |
| Package Type | Dual cartridge, side by side |
| Full Case Quantity | 10 |
| Chemistry | Two-part toughened structural acrylic, methacrylate both parts |
| Mix Ratio | 1:1 |
| Mixed Color | Transparent to pale yellow |
| Mixed Viscosity at 25°C | 21,500 cP |
| Pot Life at 23°C | 4 to 6 minutes |
| Fixture Time at 23°C | 10 to 16 minutes |
| Handling Time at 23°C | 40 to 50 minutes |
| Full Cure at 23°C | 24 to 36 hours |
| Maximum Gap Fill | 0.5 mm (0.02 in). Contains no micro beads |
| Storage Temperature | 5 to 25°C (41 to 77°F) |
| Related Composite Product | Permabond TA4611 |
What You Need to Dispense It
- Static mixer: one MBQ 05-16L ships with the cartridge. Order spares if you are running more than one bead, since adhesive cures inside the mixer and each stop needs a fresh nozzle.
- Dispensing gun: Chem-Set PAK-50 fitted with the 1:1 / 2:1 plunger.
- Order single cartridges or full cases. There is no order minimum.
Common Applications
- Close-tolerance plastic assemblies where microparticles would hold the joint open
- Visible and cosmetic joints where a thin bond line matters
- Metal to metal bonding on mild steel and stainless steel
- Bonding polyolefins to mild steel, stainless steel and aluminium
- Maintenance and repair on polypropylene, HDPE and UHMW parts
- Composite bonding on carbon fibre, epoxy FRP and polyester GRP
Related Products
- Permabond TA4611 in the 25ml hand syringe, no gun required
- Permabond TA4611 in the 400ml cartridge for production volume
- Permabond TA4631 for low-odor work areas and underwater bonding
- MBQ 05-16L static mixers
- Chem-Set PAK-50 dispensing gun
- Low surface energy plastic bonding guide
Reviews
There are no reviews yet.