Description
Integra Xi+ 100ml (Surface Bonder Xi+) is a 10:1 two-part, pre-colored seaming adhesive for quartz, porcelain, sintered surfaces, natural stone and marble, solid surface and ceramic. Fabricators use it indoors for deck seams, laminations and mitered edges. The 100ml cartridge runs through a static mixer, so there is no hand mixing or tinting, and the color and ratio are set before the bead reaches the joint. GREENGUARD Gold certified. Made in USA.
Xi+ replaces Surface Bonder Xi. Integra lists the color range and fixture time as unchanged. What changed is the substrate list and the hazard classification, covered in the FAQ below.
The 100ml size is sold in full cases of 20. For smaller quantities or mixed colors, use the 250ml cartridge.
Key Product Details
| Property | Value |
|---|---|
| Product | Integra Surface Bonder Xi+ |
| Cartridge Size | 100ml |
| Mix Ratio | 10:1 by volume (adhesive to activator) |
| Working Time | 9 to 14 minutes |
| Fixture Time | 20 to 30 minutes |
| Operating Temperature | 60°F to 80°F (16°C to 27°C) |
| Recommended Bond Line | 0.002 to 0.040 in (0.05 to 1.0 mm) |
| Viscosity, Adhesive | 20,000 to 50,000 cPs |
| Viscosity, Activator | 700 to 2,000 cPs |
| Color, Adhesive | Clear or colored viscous liquid |
| Color, Activator | Clear liquid |
| Density | 1.1 g/mL |
| Sag | Slight |
| Shelf Life | 2 years |
| Storage | 60°F to 80°F (16°C to 27°C). Do not freeze. |
| Use | Indoor |
| Substrates | Porcelain, solid surface, quartz, stone and marble, ceramic, sintered surfaces |
| Certification | GREENGUARD Gold (UL 2818) |
| Country of Manufacture | USA |
Use below 55°F (12°C) or above 90°F (32°C) may cause incomplete cure, yellowing and poor bonding strength.
Published Bond Strength
| Substrate | Max Stress, psi |
|---|---|
| Solid Surface | >4000 |
| Porcelain | >4000 |
| Sintered Stone | >4000 |
| Quartz | >4000 |
| Granite | >4000 |
Values as published by Integra. They are not a load rating for any mounting application.
Performance in Production
- The 9 to 14 minute working time gives you room to dispense the bead, close the joint and adjust the fit before the adhesive sets. Plan longer seams so you finish inside that window.
- Fixture time of 20 to 30 minutes at 60°F to 80°F is how long the joint needs to stay clamped or supported before you move the piece.
- The 0.002 to 0.040 in bond line range is the gap Integra specifies. Tight, consistent seams keep the joint inside it.
- The 10:1 cartridge and static mixer meter and blend the two parts as you dispense. No hand mixing, no tinting, and you only mix what you use.
- Shop temperature matters. Operating range is 60°F to 80°F, and Integra warns that use below 55°F or above 90°F can cause incomplete cure, yellowing and poor bond strength. Watch it in winter and on job sites.
- Integra publishes max stress above 4000 psi on solid surface, porcelain, sintered stone, quartz and granite, and lists integral mounted sinks and bowls among the applications subject to dynamic loads.
Common Applications
- Deck seams on quartz, natural stone, marble and solid surface countertops
- Seams on porcelain and sintered stone slabs
- Laminations and edge build-ups
- Mitered edges
- Integral mounted sinks and bowls
- Ceramic countertop and surface work indoors where the seam has to match the slab color
Available Sizes
| Size | Item SKU |
|---|---|
| 100ml Cartridge (this page) | INTEGRAXI100 |
| 250ml Cartridge | INTEGRAXI250 |
| 500ml Cartridge | IntegraXI500 |
Pick your color in the selector on this page. Not sure which color matches your slab? Run it through the Integra Color Match Tool.
What You Need to Dispense It
The 100ml cartridge fits the standard 10 oz caulk gun workflow.
| Item | Notes |
|---|---|
| Integra 100ml Dispenser (INTDI100MAN) | Manual dispenser built for Integra 100ml cartridges. |
| Newborn Model 250 Caulk Gun, 18:1 Thrust Ratio (NEW-250) | Caulk gun alternative for the 100ml cartridge. |
| Integra Standard X-Stream Static Mixer (INTTIPSXSTREAM) | One mixing tip per seam. |
Related Products
- Surface Bonder Xi+ 250ml: the full color range, available in broken and mixed cases.
- Surface Bonder Horizon 250ml: the Integra adhesive for seams that need an indoor and outdoor product.
How a Xi+ Seam Goes Together
Xi+ is a cartridge system, so the ratio and color are set at the factory and the mixing happens in the tip. The shop steps:
- Match the color. Use the Color Match Tool or the free Integra Adhesives app, then pick that color from the selector.
- Load the 10:1 cartridge into a matching dispenser and fit a new X-Stream mixing tip.
- Dispense the mixed adhesive into the joint and keep the bond line between 0.002 and 0.040 in.
- Close and set the joint inside the 9 to 14 minute working time.
- Keep the joint clamped or supported through the 20 to 30 minute fixture time at 60°F to 80°F.
The process runs on porcelain, solid surface, quartz, stone and marble, ceramic and sintered surfaces. Integra’s TDS does not cover surface prep. Follow your shop’s standard practice and call us with any substrate that is not on that list.
Frequently Asked Questions
What is Integra Surface Bonder Xi+ 100ml used for?
It is used for indoor countertop seaming. Fabricators run it on deck seams, laminations and mitered edges in quartz, porcelain, sintered surfaces, natural stone and marble, solid surface and ceramic. Integra also lists integral mounted sinks and bowls among the applications subject to dynamic loads.
What is the difference between Surface Bonder Xi and Xi+?
Xi+ is the current formula and Xi is the legacy product. Integra lists the color range, fixture time and sag as the same. Xi+ adds porcelain, sintered surfaces and marble to the substrate list and carries two hazard symbols instead of three. Xi+ is GREENGUARD Gold certified.
What dispenser and mixer does the Xi+ 100ml cartridge need?
A dispenser built for the 100ml cartridge and a static mixing tip. The 100ml fits the standard 10 oz caulk gun workflow. The table above lists the Integra 100ml dispenser, a caulk gun option and the X-Stream mixing tip.
What substrates does Surface Bonder Xi+ work on?
Integra lists porcelain, solid surface, quartz, stone and marble, ceramic and sintered surfaces. Published max stress is above 4000 psi on solid surface, porcelain, sintered stone, quartz and granite. For a substrate that is not on that list, call us before you commit to production.
Can I use Xi+ outdoors?
No. Integra lists Xi+ for indoor use. For seams that need an indoor and outdoor product, see Surface Bonder Horizon.
How long is the working time and fixture time for Xi+?
Working time is 9 to 14 minutes and fixture time is 20 to 30 minutes at an operating temperature of 60°F to 80°F. Integra does not publish a separate time to polish, so test a sample seam in your shop conditions before you set a production schedule.
Does Xi+ 100ml come in my color?
Xi+ comes in more than 300 pre-mixed colors, and Integra lists the 100ml size in a limited range. Check the selector on this page. If your color is not there, the 250ml cartridge carries the full range. Run your slab through the Color Match Tool or call us with the slab name.
Is Surface Bonder Xi+ GREENGUARD Gold certified, and where is it made?
Yes. Xi+ holds GREENGUARD Gold certification under UL 2818, tested to CDPH Standard Method V1.2 in an office and classroom environment. It is made in the USA.
Questions on fit for your seaming or lamination work? Call (800) 220-1966 or email [email protected].
Reviews
There are no reviews yet.