Chem-Set™ 605 Quick Set Acrylic Adhesive

$6.84
SKU
CCA605
This is a hazardous material, shipping restrictions and surcharges may apply.

ChemSet 605 Quick Set Acrylic Adhesive is a toughened structural adhesive that after curing, produces superior strength load-bearing bonds to engineered plastics including undermount sink anchors for solid surface, engineered stone and quartz. ChemSet 605 also bonds to PVC, fiberglass, ABS, FRT, PPO, PCBB, Metton®, Lomod®, Valox®, Noryl®, GTX, Minlon®, epoxy, RIM urethane, wood, poorly prepared surfaces, and where outdoor weathering or solvent exposure is anticipated.

Features:

  • Minimal surface preparation 
  • Room temperature cure 
  • 1:1 mix ratio 
  • Rapid fixture in thin set 
  • Non-sagging formula
Physical Properties (Uncured):

Color White or Clear
Working Time 2-3 min. @ 72° F
Fixture Time 8-10 min. @ 72° F
Functional Cure 3/4 - 1 hr @ 72° F
Full Cure 24 hrs.
Mix Ratio by Volume 1:1
Mixed Density 9.16 lbs./gal
Mixed Viscosity 50,000 cps
Service Temperature -67°F - 250°F

Physical Properties (Cured, 7 days @ 75° F): 

Adhesive Tensile Lap Shear (Polycarb) 1,400 psi
Adhesive Tensile Lap Shear (ABS) 1,300 psi
Adhesive Tensile Lap Shear (GBS) 3,000 psi
Gap Fill 0.125 in.
Impact Resistance 78 Shore D
Solids by Volume 100
Specific Volume 25.21 in(3) lb.
Tensile Enolgation 15-25%
Tpeel 35-40 pli
Write Your Own Review
You're reviewing:Chem-Set™ 605 Quick Set Acrylic Adhesive